Skip to main content

How to Refill Ink in Printer

Epson LX-310 Dot Matrix

Step 1: Gather Required Tools

  • New ribbon cartridge for Epson LX-310
  • Clean, lint-free cloth

Step 2: Power Off the Printer

  1. Turn off the printer and unplug it from the power source to avoid any electrical hazards.

Step 3: Open the Printer Cover

  1. Lift the top cover of the printer to access the ribbon mechanism.

Step 4: Remove the Old Ribbon

  1. Locate the ribbon cartridge holder. This is usually held in place by two clips.
  2. Carefully unclip the old ribbon cartridge by pulling the clips outward.
  3. Once free, lift the cartridge out of the printer.

Step 5: Prepare the New Ribbon

  1. Take your new ribbon cartridge out of the packaging.
  2. Check to ensure that it is indeed for the Epson LX-310 model.

Step 6: Install the New Ribbon

  1. Align the new ribbon cartridge with the holder in the printer.
  2. Insert the cartridge, making sure it fits securely into the clips.
  3. Ensure that the ribbon is feeding correctly through the print head and that it is not twisted.

Step 7: Close the Printer Cover

  1. Once the new ribbon is installed, lower the top cover of the printer.

Step 8: Power On the Printer

  1. Plug the printer back into the power source.
  2. Turn on the printer.

Step 9: Perform a Test Print

  1. Once the printer is powered on, perform a test print to ensure that the new ribbon is working properly.

Step 10: Clean Up

  1. Dispose of the old ribbon cartridge responsibly and clean any excess dust or debris from around the printer.
Epson LX-310 + II Dot Matrix

Step 1: Gather Required Tools

  • New ribbon cartridge compatible with Epson LX-310 or LX-310 II
  • Clean, lint-free cloth (optional for cleaning)

Step 2: Power Off the Printer

  1. Turn off the printer and unplug it from the electrical outlet for safety.

Step 3: Open the Printer Cover

  1. Lift the top cover of the printer to access the ribbon mechanism.

Step 4: Locate the Ribbon Cartridge

  1. Identify the ribbon cartridge holder. You will see two clips holding the cartridge in place.

Step 5: Remove the Old Ribbon

  1. Carefully press the clips away from the ribbon cartridge to release it.
  2. Lift the old ribbon cartridge out gently.

Step 6: Prepare the New Ribbon

  1. Take the new ribbon cartridge out of its packaging and inspect it to ensure it's the correct type for your printer model.

Step 7: Install the New Ribbon

  1. Align the new ribbon cartridge with the holder.
  2. Insert the new cartridge into the printer, ensuring it fits securely and the clips lock into place.
  3. Make sure the ribbon is properly threaded through the print head. It should pass over the print head and below it without being twisted.

Step 8: Close the Printer Cover

  1. Once you have installed the new ribbon, lower the top cover of the printer until it clicks into place.

Step 9: Power On the Printer

  1. Plug the printer back into the power outlet.
  2. Turn on the printer.

Step 10: Perform a Test Print

  1. After the printer is powered on, perform a test print to check that the new ribbon is functioning correctly.

Step 11: Clean Up

  1. Dispose of the old ribbon cartridge properly, and clean around the printer if needed.
Back to top